Cyclo Drive Reducer

Cycloidal pinwheel reducer is normally a up-dated of fresh type transmissing machine made with K-H-V less tooth engagement and the cycloidal pin steering wheel clenching mechanism, which are trusted in drive and minimizing of textile and dying, foodstuff, mining and metallurgy, Essential oil and chemical cranes, conveyors, project machinery etc and Sector. various fields.

1. Equipment is made from high durability low carbon alloy steel by carburizing and quenching. The hardness of tooth area can reach HRC58-62. CNC grinding technology is adopted for all gears, good get in touch with performance and with large precision
2. high transmission productivity: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable procedure and low noise;
4, compact structure, light-weight, long service existence and high bearing capacity;
5. convenient to assemble, disassemble and check.

Operation specifications and precautions
1.High modularization design: many equip with various engine or other power source conveniently.Same machine type may equip with various power motor. It really is easy to recognize the combination and
junction between every machine type.
2.Transmission ratio: good division, wide scope. The combined machine type may form large transmission ratio, i.e. result very low rotary speed.
3.Form of assembly: the position to be installed is not limited.
4.High strength, small: the box body is made of substantial strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and excellent grinding process, therefore the bearing potential of unitvolume is huge.
5.Long life: Beneath the condition of right type chosen (including choosing ideal operation parameters)normal procedure and maintenance, the life of main elements of speed reducer (except dressed in parts) shouldn’t be less than 20000 hours. The wearing parts include lubricating essential oil seal, bearing and oil.
6.Low noise: because main elements of speed reducer are processed, assembled and tested critically,therefore the noise of speed reducer is definitely low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High swiftness ratio and efficiency
Single stage transmission may reach to 1 1:87 of speed-downwards ratio and the efficiency is going to be more than 90%. If use multi-speed drive the speed-down ratio can be bigger.
2. Compact
Being adapted epicyclic tranny basic principle, the input and output shaft are at same axis middle, it is compact.
3. Smooth and stable run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the device part is stable, the vibration and noise is limited anyway content.
1. Large deceleration ratio
A higher deceleration ratio of 1/30-1/320 can be obtained.The structure is simple, but it can realize high reduction ratio machine.
2. Small gear clearance
The Get, which meshes with ordinary gears and has minimal backlash, is vital to the controller business.
3. High precision
Multiple teeth are involved as well, and there are several gears engaged with 180 degree symmetry. As a result, the effect of tooth pitch error and cumulative tooth pitch mistake on the rotation precision is relatively average, making the positioning precision and rotation accuracy reach an extremely high level.
4. Less parts, easy installation
The three basic elements achieve a high deceleration ratio, plus they are all on a single axis, therefore the kit is easy to install and easy to shape.
5. Small in proportions and light in weight
Compared with the prior gear device, the volume is 1/3, the fat is 1/2, but can buy the same torque ability and reduction ratio, attaining small lightweight.
6 High torque capacity
Flexible wheel materials USES unique steel with substantial fatigue strength.Not the same as ordinary transmission system, the quantity of teeth meshing accounts for close to 30% of the total amount of teeth. In addition, it is in get in touch with with the surface, so that the pressure borne by each equipment is reduced and substantial torque potential can be obtained.
7 High efficiency
The sliding of gear meshing parts is very small, which reduces the power loss caused by friction. Therefore, high decrease ratio may be accomplished while maintaining high proficiency, and miniaturization of driving motor can be realized.
8. Low noise
The apparatus meshing cycle swiftness is low, the transmission movements force balance, therefore the operation is quiet, and the vibration is quite small.
◆Large speed ratio and excessive efficiency single-stage transmission can achieve a deceleration ratio of 1 1:87, and the efficiency is a lot more than 90%. If multi-stage transmission is used, the deceleration ratio will be larger.
◆Because planetary transmission principle is adopted, the input shaft and productivity shaft are on a single axis line, in order that the machine unit can get the tiniest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is greater, and the mechanism of balancing machine parts produces the vibration and voice limited to a minimum.
◆Reliable use and long service life for the reason that primary parts are created from excessive carbon chromium steel, large strength is going to be obtained by quenching (HRC58-62), and rolling friction is employed in some transmission contacts, therefore the service life is long.
Cycloid reducer is usually a cycloid needle teeth meshing planetary transmission principle drive models, is a perfect transmission has various advantages, versatile, and can be both negative and positive operation.

•Big ratio, and excessive efficiency Smooth operation,

• low noise The use of reliable,

• extended life can reach 50000 hours

• Main parts high-carbon the Ming-metal after quenching treatment (HRC58-62),

• operation and contact with rolling friction, basically very little wear, durable.

• Compact structure,

• small size Because the consumption of a planetary transmitting, the insight shaft and the productivity shaft on the same axis, making the model to obtain the smallest possible size.

• Reasonable design, easy maintenance, and breakdown easily install,

• the least number of parts in addition to basic lubrication, cycloid reducer trusted by the user.
(1)Size above PL/PF120(including)high torque products adopt essential double wall world pinion precision, improve the output strength and carrier.

(2).Hoop clamp coupling have five connection methods suited to different application environments.

(3).Size above PL/PF120(incorporating)precision and high power integral inner gear casing, processed in a single station,which eliminate the cumulative error and assembling error of split type.Eliminate casting process;adopt sizzling of forging process, that will reduce the blank material defects.

(4).The meshing gear adopt shaving method after carburizing and quenching,which easier to make gear area smooth and high precision,reduce the temperature rising caused by gear surface gluing and friction.
This series worm-gear reducer was built after RV worm microreducer, which have a complete norm, wide speed for selection, and several mounting positions. Its efficiency and mounting dime nsions conform the same kinds of foreign.
The mixture of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, radiate heat efficiently, compact structure, low noise and beautiful shape.
Great sealing and adaptability.Its combo with T gear reducer and MB/MBN variator may meet a myriad of speed requirement.


As one of leading jaw coupling manufacturers, suppliers and exporters of mechanical products, We offer jaw coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of jaw coupling

Recent Posts